This article is part of the Admin Setup (Step-by-Step) guide.
When installing the Lamassu software at Step 7, the install script asked for your email address and, once finished, provided a link to access the admin:
- Copy the link you have saved on your notepad (as per instructions here).
- Open a web browser and paste the link.
We recommend Firefox, Brave, or Safari. The Chrome browser may not permit the login.
When Firefox, for example, gives a warning, click the 'Advanced...' button, then click 'Accept the Risk and Continue'.
(The admin is secure, though it uses a self-signed security certificate, thus the warning.)
Click on your computer's OS below and follow the directions to install your node wallets:
Accessing the admin
After accessing the provided link, follow the instructions below:
Creating your user
The Lamassu Admin will prompt you to set up a password.
Make sure is a strong and safe password that only you know.
Once you're certain of your password in both fields, click the green 'Done' button:
Next, it will prompt you to log in with the email address you entered when installing the software and your freshly set password.
Then, click the green 'Login' button:
Then, follow the instructions to set up 2FA, and click 'Done':
You should be prompt to start the Admin wizard setup as per our section below.
Basic admin configuration
Check the basic configuration of your Lamassu admin on the tabs below:
Initial admin settings
Once opened, our start-up guide will help you to configure any admin fields necessary to get it up, and running (base commission rate, wallet services, ticker, etc.):
The Funding panel
After installing your coins on Step 7 and configuring each coin's wallet under 'Settings > Wallet', obtain deposit addresses under the 'Maintenance > Funding' panel.
Deposit only small amounts until you've successfully conducted test transactions. Deposits will require one confirmation before becoming available to dispense, and the wallets must be fully synced before deposits appear.
The Compliance Triggers panel
Prior to deployment, you may want or need to enable features within your compliance panel.
Please read our compliance section for full details on how to enable these features.
To create new compliance triggers, click the '+ Add new trigger' button and follow the steps.
After the above is complete, continue with Step 9 in this section.