The Kaba Mas Cencon lock is an optional auditable lock upgrade for the Sintra, Sintra Forte, and Tejo.
It's shipped in Shelved mode (Factory mode), operating with a default combination of 50-25-50.
Opening in Shelved Mode
⚠️ NOTE: If you realize that you have accidentally entered an incorrect number as part of the combination, there is no “backspace” key.
You can hold down the ∗ key to clear. Then, you would repower the lock and start again.
Steps:
- Turn the Dial left (CCW) until the letters 'EC' (Enter Combination) appear on the LCD. ('-dL' will appear first signaling to dial Left.)
- Enter the factory combination of 50-25-50 by sequentially pressing those six buttons. The LCD will display these numbers as they are entered.
- When the combination has been correctly entered, the LCD will read 'OPr.' meaning OPen right.
- Turn the Dial right (CW) until it stops. The lock’s bolt is now retracted and the lock is open.
- Turn the Dial left (CCW) a full revolution to extend and secure the lock’s bolt.
- To test that the bolt is securely closed, turn the dial back to the right and ensure the bolt remains extended.
- Try this several times until you are comfortable with the operation of the lock.
Changing the Shelved Mode Combination
⚠️ NOTE: You can only change the Shelved Mode combination while operating in Shelved Mode. Once a lock is “activated” in any mode, the Shelved Mode combination returns to the Factory Default of 50-25-50.
Steps:
- Power Lock -> EC
Turn the Dial to the left (CCW) until 'EC' (Enter Combination) is displayed. - EC -> Enter Shelved Mode Combination -> OPr
Enter the current Shelved Mode combination (either 50-25-50 or a changed Shelved Mode combination) by sequentially pressing those digits on the lock keypad. The numbers will be displayed on the LCD as they are entered. - OPr -> Retract Bolt
Turn the Dial to the right (CW) to retract the bolt. - Open Door
- Insert Change Key
Insert the change key into the change key socket on the back of the lock. - Extend Bolt
Do not close the door. Turn the Dial to the left (CCW) to extend the bolt. - Power Lock ->
EC
Turn the dial to the left (CCW) until 'EC' (the Change Key symbol along with Enter Combination) is displayed.
EC -> Press #8 -> EcF
Press the “#” button followed by the “8” button. 'EcF' (Enter current Factory combination) will be displayed.- EcF -> Enter Current Shelved Mode Combination -> EnF
Enter the current shelved mode combination, 'EnF' (Enter new Factory combination) will be displayed. - EnF -> Enter New Factory Combination -> Cnf
Select and enter the new combination. 'CnF' (Confirm new Factory combination) will be displayed.
⚠️ NOTE: The new Shelved Mode combination should be recorded and stored in a secure area. - CnF -> Confirm new Factory combination -> POC
Enter new combination again to confirm. 'POC' (Pull Out Change key) will be displayed. - POC -> Remove Change Key -> EOP
Remove the change key. 'EOP' (End OPeration) is displayed - EOP -> Power Lock -> EC
Turn the dial to the left (CCW) until 'EC' (Enter Combination) is displayed. - EC -> Enter New Shelved Mode Combination -> OPr
Enter the new shelved mode combination by pressing those digits on the lock’s keypad. The numbers will be displayed on the LCD as they are entered. - OPr -> Retract Bolt
Turn the Dial to the right (CW) to retract the bolt. - Close Door
- Extend Bolt
Turn the Dial to the left (CCW) to extend the bolt.
⚠️ WARNING: Continuing to operate the lock in Shelved Mode, even after changing the combination from 50-25-50, is similar to the minimal security that a mechanical lock would provide. If the new 6-digit Shelved Mode combination is lost or forgotten, with the safe door closed, the door must be drilled. Therefore, it is recommended to take full advantage of the additional security, audits, and access control of the Cencon lock by activating it with the Cencon software and using the SmartKeys for openings.
Reference Manual
You may find in the following link the lock's software reference manual, with complete instructions on all of the lock's features:
Comments
0 comments
Article is closed for comments.